THE FOLLOWING KITS ARE AVAILABLE
FOR THE VARIOUS MODELS AS LISTED
Prices Effective 07/18/05
|
Six
(6) cylinder Cummins Re-power Kit list for 9TM
or 95TM with a Clark Transmission, 95TM body frame
and cab. These kits are designed to be used
with a 1075859 6-cylinder Cummins engine. Kits
are not designed for 9TM with an Allison Transmission. |
| Description
of Kits |
Part
Number |
Req |
sUG.
lIST |
|
Radiator
Conversion
|
1076291
|
1
|
$
2,835.55 |
|
Cummins
Engine
|
1075859
|
1
|
QUOTE |
|
Engine
Re-power (Less Engine)
|
1076295
|
1
|
$
2,350.78 |
|
Fuel
Shutoff
|
1077051
|
1
|
$ 199.78 |
|
Air
Cleaner
|
1077138
|
1
|
QUOTE |
|
Exhaust
|
1076942
|
1
|
$ 958.03 |
|
Accelerator
|
1076871
|
1
|
$ 487.28 |
|
Engine
Oil Gauge
|
1077050
|
1
|
$ 100.09 |
|
Body
Frame Modification
|
1076292
|
1
|
$ 80.87 |
|
Hood & Grille
Replacement
|
1076943
|
1
|
$
1,827.39 |
Optional
Kits |
|
Engine
Shutdown
|
1077049
|
1
|
$ 848.24 |
|
Accelerator
(Air Operated)
|
1076320
|
1
|
QUOTE |
|
Cab
Heater
|
1077052
|
1
|
QUOTE |
|
Air
Intake Pre-cleaner
|
1078135
|
1
|
QUOTE |
|
| |
KIT PART
NUMBER
|
SUGGESTED LIST PRICE,
FOB FACTORY
US DOLLARS
|
|
Radiator
Conversion Kit
|
| Includes
Radiator, Shroud and Required plumbing for
conversion to Cummins. |
|
1076291
|
$2,835.55 |
| Cummins
Engine Assembly |
| Fan
to Flywheel B5.9C six cylinder engine. Includes
a 15.3 CFM Compressor. |
|
1075859
|
QUOTE |
| Engine
re-power kit (less engine) |
| includes
required parts to install engine in main
frame. |
|
1076295 |
$2,350.78 |
| Fuel
Shutoff Kit |
| Includes
fuel relay and solenoid. |
|
1077051
|
$
199.78 |
| Air
Cleaner Kit |
| Includes
a two-stage hand rail mounted air cleaner
and necessary brackets and connectors. |
|
1077138
|
QUOTE |
| Exhaust
Kit |
| Includes
a Spark Arrestor Muffler, connectors and
necessary brackets. |
|
1076942
|
$ 958.03 |
| Accelerator
kit |
| includes
necessary parts to install accelerator using
cable and rod assembly. |
|
1076871
|
$ 487.28 |
| Engine
Oil Pressure Gauge Kit |
| Replaces
original gauge used with Detroit Diesel Engines. |
|
1077050 |
$ 100.09 |
| Body
Frame Modification Kit |
| Designed
to make needed modification to the body frame
to install engine. |
|
1076292 |
$ 80.87 |
| Hood
and Grille Replacement Kit |
| Designed
for required clearance for engine and larger
radiator. |
|
1076943 |
$1,827.39 |
| Engine
Shutdown Kit |
| Automatic
shutdown for low water level, high water
temperature or low engine oil pressure. Must
be used with the 1077051 Fuel Shutoff Kit |
|
1077049 |
$ 848.24 |
| Air
Operated Accelerator Kit |
| Includes
foot pedals, linkage and air controls. Can
be used for Radio Control applications. |
|
1076320 |
QUOTE |
| Cab
Heater Kit |
| Includes
heater and necessary plumbing for Cummins
application. |
|
1077052 |
QUOTE |
| Air
Intake Pre-Cleaner Kit |
| Replaces
the original inlet hood in the 1077138 Air
Cleaner Kit. For extreme dusty applications
such as foundries. |
|
1078135
|
QUOTE |
| Cab,
Hood and miscellaneous accessary kit list
for 9Tm, 95TM, 4000TM, 4000TMS and 4200TM |
|
|
|
| Cab
Kit |
| Includes
a 1068730 Cab, two-way seat assembly, floor
mat and mirror.. |
|
1077156 |
$9,856.79 |
| Cab
Assembly |
| Includes
doors, tinted glass, insulation and overhead
wiring. |
|
1068730 |
$8,558.68 |
| Hood & Grille
Kit (9TM & 95TM) |
| For
machines with a Detroit Diesel Engine. |
|
1077157 |
QUOTE |
| Hood & Grille
Kit (9TM & 95TM) |
| For
machines with a Cummins 6-Cyl Engine. |
|
1076943 |
$1,827.39 |
| Hood & Grille
Kit (4000TM, 4000TMS, 4200TM) |
| For
machines with a Detroit Diesel Engine. |
|
1059833 |
$1,823.31 |
| cab & hood
mounting kit (9TM & 95TM) |
| replaces
original isomode pads with lord mounts. |
|
1077164 |
$ 202.22 |
| Cab & Hood
Mounting Kit (4000TM, 4000TMS, 4200TM) |
| Replaces
original Isomode pads with Lord Mounts. |
|
1077326 |
$ 131.57 |
| Cab
Extension Kit |
| L.
H. Cab Extension - For 1068370 cabs. Uses
the original sliding glass window. |
|
1058555 |
QUOTE |
| Front
Windshield Wiper Kit |
| Can
also be used on 4150TM & 4250TM |
|
1067452 |
$ 255.54 |
| Rear
Windshield Wiper Kit |
| Can
also be used on 4150TM & 4250TM |
|
1067453 |
$ 249.79 |
| Cab
Heater Replacement Kit |
| Direct
replacement for obsolete cab heaters. Can
also be used on 5TM, 55TM, 1800TM, 7TM, 4150TM & 4250TM |
|
1074638 |
$ 405.74 |
| Dual
Air Horn Kit |
| Includes
two 1012316 air horns and installation parts |
|
1021212 |
$ 432.79 |
| Strobe
Light Kit (12V - 80V) |
| Includes
one amber strobe light and installation parts. Can
be used on most TRACKMOBILES. |
|
1074628 |
$ 185.97 |
| Strobe
Light Replacement Kit (12V - 80V) |
| Replaces
obsolete 1058000 amber strobe light. |
|
1073622 |
$ 128.72 |
| Miscellaneous
Update Kits for Machines With Detroit diesel
Engines. |
|
|
|
| 9TM,
95TM & 4000TM Radiator Replacement
Kit |
| Replaces
original obsolete Radiators (Shroud is not
included) |
|
1069633
|
$2,060.92 |
| 5TM,
55TM, 75TM, 9TM, 95TM, 1800TM, 4000TM,
4000TMS & 4200TM Engine Shutdown Kit |
| Automatic
engine shutdown for low water level, high
water temperature or low engine oil pressure. A
Fuel Shutoff Kit is required - 1069313 or
1069318. |
|
1069042
|
$ 625.45 |
| 5TM,
55TM, 75TM, 9TM, 95TM, 1800TM, 4000tm & 4000TMS
Fuel Shutoff Kit |
| Replaces
original air cylinder/solenoid that was used
in older engine shutdown options. |
|
1069313
|
$ 574.55 |
| 4200TM
Fuel Shutoff Kit |
| Replaces
original air cylinder/solenoid that was used
in older engine shutdown options. |
|
1069318
|
$ 876.35 |
| 9TM & 95TM
Dual Compressor Kit (24 CFM) |
| Includes
two 12 CFM compressors and installation
parts.
Note: 9TM
with an Allison Transmission may require
additional parts (contact factory with
serial numbers)
|
|
1074045
|
QUOTE |
| 9TM & 95TM
Dual Compressor Kit (32 CFM) |
| Includes
two 16 CFM Compressors and installation
parts. Each compressor must have
a 1067566 air inlet check valve installed
on each compressor.
Note: 9TM
with an Allison Transmission may require
additional parts (contact factory with
serial numbers)
|
|
1064116
|
QUOTE
|
| 9TM,
95TM, 1800TM & 4000TM Dual Compressor
Air Intake Kit |
| Connects
compressors directly into a 1065820 standard
engine air filter. For Bendix or Midland
compressors. |
|
1071088
|
QUOTE |
| 9TM,
95TM & 4000TM Dual Compressor Air Intake
Kit |
| Connects
compressors directly into a Farr or Donaldson
deck mounted engine air cleaner. For
Bendix or Midland Compressors. |
|
1071075
|
$ 148.52 |
| Miscellaneous
Train Air Brake Update Kits |
|
|
|
| 9TM & 95TM:
Kits required to add Train Air on machines
with 12 CFM, 24 CFM or 32 CFM Air.
Standard
Kits
| Description
of Kits |
Part
Number |
Req |
sUG.
lIST
|
|
Piping,
Hoses, Tank & Valving Kit
|
1079000
|
1
|
$
2,603.08 |
|
Console-Only
Required on 9TM
|
|
with
cable coupler release
|
1066782
|
1
|
QUOTE |
|
|
|
|
| Piping,
Hoses, Air Tank & Valving |
| Includes
required parts to add train air brakes to
Trackmobile. |
|
1079000
|
$2,856.28 |
| 9TM & 95TM
A-9 Valve Replacement Kit |
| Includes
parts to replace obsolete A-9 Train Air Brake
Control Valve. |
|
1078971
|
$1,592.60 |
| 5TM,
55TM & 1800TM A-9 Valve Replacement
Kit |
| Includes
parts to replace obsolete A-9 Train Air Brake
Valve. |
|
1078954
|
$1,500.77 |
| Miscellaneous
Main Frame, Rail Axle, Road Axle and Steering
Update Kits |
|
|
|
| Frame
and Rail Axle Housing Rework Kit (9TM) |
| This
kit is designed to rework the rail axle and
rail axle opening in the main frame when
clearance exceeds tolerances. The original
tolerance from front to rear should not exceed
.020 inches. When the axle opening
is too large it allows the axle to rotate
in the frame. The frame modification
can be done as a field job, adding high carbon
steel plates to the frame and axle and making
the frame openings 1" thicker. Axle
housing requires machine work. (Kit
includes parts for one end) |
|
1076795
|
$2,766.66 |
| Frame
And Rail Axle Housing Rebuild Kit (95TM) |
| This
kit is designed to rework the rail axle and
rail axle opening in the main frame when
clearance excess tolerances. The original
tolerance from front to rear should not exceed
.020 inches. When the axle opening
is too large it allows the axle to rotate
in the frame. The frame modification
can be done as a field job, adding high carbon
steel plates tot he frame and axle and making
the frame openings 1" thicker. Axle
housing rework requires machine work. (Kit
includes parts for one end.) |
|
1059086
|
$
1,275.18 |
| Clark
Rail Axle Disc Brake Kit (9TM) |
| Replaces
obsolete drum & shoe brakes with disc
brakes. Kit includes parts for both
rail axles. If the original brake system
used mineral oil, the road brakes and master
cylinder must be converted to use DOT-3 brake
fluid. |
|
1060967
|
$4,862.96 |
| Rockwell
Rail Axle Disc Brake Kit (9TM) |
| Replaces
obsolete drum & shoe brakes with disc
brakes. Kit includes parts for both
rail axles. If the original brake system
used mineral oil, the road brakes and master
cylinder must be converted to use DOT-3 brake
fluid. |
|
1060966
|
$5,556.87 |
| Power
Steering Conversion kit (9TM) |
| Converts
the open center steering orbitrol to a 4000TM
style closed center orbitrol eliminating
the power steering pump. This will
also allow a second compressor to be added
to the rear of a Detroit Diesel Engine on
machines with an Allison transmission. |
|
1072274
|
$ 1,205.19 |
| 9TM,
95TM, 4000TM, 4150TM, 4200TM, 4250TM, 4300TM,
4350TM, 4500TM, 4600TM, 4650TM, 4750TM & 4850TM
King Pin Replacement Kit |
| Includes
parts to replace one king pin. Two
kits required per steer axle. |
|
1035762
|
$ 123.61 |
| 9TM,
95TM, 4000TM, 4150TM, 4200TM, 4250TM, 4300TM,
4350TM, 4650TM, 4750TM & 4850TM Road
Axle Bushing Replacement Kit |
| Includes
bushings for one front or rear road axle
where axle attaches to main frame. Bushings
do not require grease. |
|
1076522
|
$ 75.79 |
| 5TM
Serial No. 5638 & After Power Steering
Conversion Kit |
| Replaces
all obsolete manual steering gears with 1800TM
style power steering |
|
1074145
|
$4,108.71 |
| Miscellaneous
Air Sander Update Kits |
|
|
|
| 5TM,
7TM, 9TM, 11TM, 55TM, 75TM, 95TM, 1800TM & 5500TM. All
Switchmasters. Air Sander Valve Replacement
Kit |
| Replaces
one obsolete 1013189, 1014681 or WM48008
sander valve only. Requires minor modifications
to the original sand box and sand tube. |
|
1060950
|
$ 164.52 |
| Air
Sander Valve Replacement Kit (9TM & 95TM) |
| Replaces
eight obsolete 1013189 or 1014681 sander
valves. Requires minor modifications
to the original sander boxes. Use 1077270
or 1077271 sand tube replacement kits listed
below. |
|
1077130
|
$1,438.37 |
| Sand
Tube Replacement Kit (9TM - 23" Rail Wheels) |
| Replaces
original sand tubes on one end of machine
with current style sand tubes. Use
with 1060950 or 1077130 sander valve kits. |
|
1077270
|
$ 375.19 |
| Sand
Tube Replacement Kit (95TM - 27" Rail Wheels) |
| Replaces
original sand tubes on one end of machine
with current style sand tubes. Can
be used with 1070950 or 1077130 sander valve
kits. Can also be used on 4000TM. |
|
1077271
|
$ 384.12 |
| Kits
Required to Replace Standard Curved Coupler
Beam and Obsolete Coupler Assembly on 9TM |
|
|
|
| 9TM
with 23" Rail Wheels - Standard Coupler-One
End
Description
of Kits Part
Number Required
|
Coupler
Head Assembly
|
1071379
|
1
|
|
Coupler
Beam
|
1071382
|
1
|
|
Coupler
Knuckle Release (Air)
|
1071390
|
1
|
|
Traversing
Cylinder
|
1071391
|
1
|
9TM
with 27" Rail Wheels - Standard Coupler-One
End
Description
of Kits Part
Number Required
|
Coupler
Head Assembly
|
1071392
|
1
|
|
Coupler
Beam
|
1071382
|
1
|
|
Coupler
Knuckle Release (Air)
|
1071390
|
1
|
|
Traversing
Cylinder
|
1071391
|
1
|
When
replacing both couplers, order 2 each
of coupler head kits, coupler beam kits,
traversing cylinder kits and 1 of 1071730
dual coupler knuckle release kit.
|
|
|
|
| Coupler
Head Kit |
| Includes
complete coupler head with rollers for machine
with 23" rail wheels. |
|
1071379
|
QUOTE |
| Coupler
Head Kit |
| Includes
complete coupler head with rollers for machines
with 27" rail wheels. |
|
1071392
|
QUOTE |
| Coupler
Beam Kit |
| 95TM
style straight coupler beam. |
|
1071382
|
QUOTE |
| Air
Coupler Knuckle Release Kit |
| Includes
parts required to add air coupler release
to front or rear coupler. |
|
1071390
|
QUOTE |
| Traversing
Cylinder Kit |
| Includes
current production traversing cylinder and
parts required to add to front or rear coupler. |
|
1071391
|
QUOTE |
| Dual
Air Coupler Knuckle Release Kit |
| Includes
parts required to add air coupler release
to both ends of machine. |
|
1071730
|
QUOTE |
| Miscellaneous
coupler update kits |
|
|
|
| 7TM & 9TM
With Curved Coupler Beam:
Traverse
Cylinder Conversion Kit
|
| Replaces
the original two-stage obsolete traversing
cylinder with a current production single
stroke cylinder. Includes parts for
one standard coupler. |
|
1073528
|
$ 578.22 |
| 9TM
With Cable Coupler Release:
Air
Coupler Knuckle Conversion Kit
|
| Includes
parts to replace both coupler release cables
with 95TM style coupler knuckle release. For
standard couplers only. |
|
1062725
|
$ 718.88 |
| 95TM,
4000TM, 4200TM, 4350TM, 4150TM, 4250TM,
4350TM Coupler Poly Block Conversion Kit |
| Replaces
the original coupler rollers with polyurethane
blocks. Includes parts for one coupler. |
|
1080767
|
$
1,750.53 |
| Miscellaneous
Transmission Update Kits |
|
|
|
| 5Tm & 9Tm
Allison Transmission Dipstick Kit |
|
1073695
|
$ 166.55 |
| 9TM,
95TM, 4000Tm & 4200TM Clark Transmission
Dipstick Kit |
|
1067670
|
$ 121.27 |
| 9TM
With Curved Coupler Beams:
clark
Transmission Spin-On Filter Kit
|
| Replaces
the original cartridge type filter assembly. Mounts
on inside of body frame. |
|
1064624
|
$ 216.76 |
| 95TM,
4000TM, 4200TM & 4300TM, 9TM with
new style straight coupler beams:
Clark
Transmission Spin-On Filter Kit
|
| Replaces
the original cartridge type filter assembly. Mounts
on outside of body frame. |
|
1068294
|
$ 384.48 |
| Miscellaneous
Hydraulic System Update Kits |
|
|
|
| 9TM,
95TM $ 4000Tm with 1004876 or 1069110 5-Spool
Control Valve. Seal & Relief
Valve Kit |
| Includes
outside o-rings and wipers for spool sand
new relief valve assembly. |
|
1062362
|
$ 566.09 |
| 9Tm,
95TM & 4000TM with 1004576 or 1069110
Control Valve Relief Valve Replacement
Kit |
|
1067861
|
$ 562.46 |
| 9Tm,
95TM & 4000TM - Build Prior to Oct.
1993. Road Axle Counter Balance Kit |
| When
properly installed, this kit will keep the
road axle from "Drifting". |
|
1075083
|
$ 301.51 |
| 9TM,
95TM & 4000TM. Hydraulic Lockout
Kit |
| For
machines built after Oct 1993 with factory
installed road axle counter balance valve
or had a 1075083 kit installed. Install
a hydraulic lockout in system on the manual
control valve. |
|
1077147
|
QUOTE |
| 9TM,
95TM, 4000TM. Hydraulic Lockout/Counter
Balance Kit |
| Includes
parts to install hydraulic lockout and counter
balance valve. |
|
1077145
|
QUOTE |
| Miscellaneous
Troubleshooting Tools |
|
|
|
| ALL
Models. Hydraulic Pressure Gauge
Kit |
| Includes
one 0-3000 PSI gauge, hose and various fittings. |
|
1079336
|
QUOTE |
| ALL
Models. Hydraulic Pressure Gauge
Kit |
| Includes
one multi-gauge (0-150 PSI, 0-600 PSI and
0-5000 PSI), hose and various fittings. |
|
1079335
|
QUOTE |
| All
Models using a current 1064128 Hydraulic
Filter Assembly. Hydraulic Flow Meter
Kit |
| This
flow meter is rapidly installed and used
to troubleshoot the hydraulic system. It
is used for system diagnostics by connecting
directly into the hydraulic system in place
of the return filter. After use, the
flow meter is removed and the filter is quickly
replaced to its normal location and function
in the system. |
|
1076204
|
$ 146.88 |
